Share

Not All Painted Steel Is Equal: UniCote on Coatings, Coastal Risk and Supply

UniCote national sales manager Jason Voglis joined Az on The Good Builder Podcast to talk through what sits under the paint, why supply planning has become a margin issue, and what premium should actually mean to a builder. Why can two roof sheets that look the same perform so differently? Two sheets of painted steel […]

Read

Fri 30 Oct 26 9:44:00 AM

tgb-logo-crop

UniCote national sales manager Jason Voglis joined Az on The Good Builder Podcast to talk through what sits under the paint, why supply planning has become a margin issue, and what premium should actually mean to a builder.

Why can two roof sheets that look the same perform so differently?

Two sheets of painted steel can sit side by side in the same colour and look identical.

According to Jason Voglis, that is exactly where a lot of material decisions go wrong.

“There’s a misconception in the market that all product is the same because it looks the same,” Voglis told Az on The Good Builder Podcast.

Voglis is national sales manager for UniCote, the prepainted steel brand sold through INSPIRE, a division of Selection Steel. He came to the industry from real estate a little over eight years ago and now leads a national team working with builders, architects, installers and roll formers on product selection.

His point is simple. The colour is the part everyone sees. The performance sits underneath.

“When you actually break it down and the different substrates and the coil coating technologies and the paint systems, they perform very differently,” he said.

That difference shows up in three places builders care about: how long the material lasts, what warranty it carries, and what it costs.

What is the substrate in prepainted steel?

The substrate is the steel or aluminium sheet, and its metallic coating, that sits under the paint. In steel roofing that coating is usually an alloy of zinc and aluminium, sometimes with magnesium added. Codes such as AZ150 or AM210 describe the type and weight of the coating. Two sheets in the same colour can sit on very different substrates, which is why they can carry different warranties and suit different environments.

How is the UniCote range structured?

UniCote publishes its range across four tiers. Select is the everyday steel product. Coastal adds magnesium to its zinc and aluminium coating for harsher, salt affected locations. Extreme replaces steel with marine grade aluminium, which Voglis said does not succumb to red rust. LUX is the architectural range, with patterned finishes made to resemble timber, corten, zinc, copper and brass.

Voglis said LUX answers a familiar problem. Corten bleeds rust, timber needs ongoing maintenance and is combustible, and zinc, copper and brass are costly to buy and install. Seven new LUX finishes, including timbers, a brass and coppers, have just landed.

He also flagged a detail on matte colours. A matte finish reads as premium, but that does not make it suitable beside the water. UniCote offers its matte colours on the Coastal product as standard, so that “the matte and the premium finish is also backed up by a premium substrate,” he said.

How far inland does coastal corrosion risk reach?

Corrosion risk is not a neat line drawn from the shoreline.

“Just because you’re a K away from the water doesn’t mean you’re entirely safe,” Voglis said. Prevailing winds can carry salt well inland, and he said that is what catches out builders who keep using the same product they always have.

UniCote’s approach is to assess each site. Voglis said that for projects near the water or in any corrosive environment, the business can return written warranty confirmation within 24 to 48 hours, typically setting out both a Coastal and an Extreme option so the builder can weigh warranty length against cost.

In his view the economics are lopsided. If the wrong roof corrodes, “the cost to replace that roof is significantly more than if you had to pay that little bit extra at the start to get the right material.”

He pointed to landmark projects including the roof at Icebergs in Bondi, the Townsville stadium roof, and a new pavilion at Mars Stadium in Ballarat, where UniCote Extreme was used on the underside because rain never washes it down.

Why has supply planning become a margin issue for builders?

The second half of the conversation turned to supply.

Az described volume and small builders telling him in recent months that material delays had pushed their builds out by six to eight weeks. Voglis said there had been supply issues in Queensland a few months earlier and that a lot of builders got caught out.

Looking back over the past six years, his read is blunt. “We found that customers were loyal to a particular brand and potentially that brand wasn’t loyal to them,” he said. Shortages meant delays on site, and “it’s ultimately the builder that pays for that.”

It’s ultimately the builder that pays for that.

With builders working on slim margins, he said, a delay can be make or break.

Price sits right alongside supply. “They want price locked in for as long as possible,” Voglis said, noting that some builders sign contracts and do not start building for six to 18 months.

How does UniCote say it keeps supply steady?

Voglis described three parts to the model.

The first is dual supply. UniCote product is made to the company’s own specification by two ISO accredited mills, one in South Korea and one in New Zealand, with relationships he put at 25 and 45 years respectively.

The second is independent testing. “We have it independently tested quite regularly, which is important for us,” he said, citing the CSIRO among the organisations involved.

The third is stock. “We hold stock based on historical usage, plus a little bit of a buffer for growth,” he said. He described months of stock held nationally, new shipments arriving every month, and the ability to move stock between states when one runs short.

He said that combination meant UniCote “didn’t run out on any of our customers” through COVID.

On imported product, he was direct. “The misconception is that imported equals inferior, and it’s not the case,” he said. In his view, the mill, the specification and the testing decide quality.

Voglis said the conversation UniCote wants with builders is about adding certainty rather than tearing up arrangements that are working. He also observed that many builders roll over supply agreements without reviewing them, and that across 50, 100 or 300 homes a year, small benefits really compound.

What should premium actually mean to a builder?

“Premium” is one of the most overused words in building products. Az put the question to Voglis directly.

His answer had two parts. “You’ve got to have a premium product and then couple that with a premium experience for that customer,” he said. That experience covers reliability, credibility, technical advice and being able to get someone on the phone when a problem comes up on site.

“And that’s what creates trust. That’s what creates loyalty.”

Voglis said the business has around 150 staff nationally but runs like a small family business, and that service is what keeps builders and roofers loyal when other offers come along.

What makes a good builder, from a supplier’s point of view?

Asked what makes a good builder, Voglis talked about communication with clients and suppliers, and a genuine passion for the work, because families grow up in these homes.

Then he landed on the part nobody sees. A beautiful facade with lovely cladding and a nice kitchen will impress, he said, but it is the things the customer may never see that make the builder.

“Ultimately it’s a builder that gives a damn.”

Material choice sits in exactly that space. The sheet matched to the site. The coating that suits the wind, not just the postcode. The warranty confirmed in writing before the job starts.

None of it shows on handover day. All of it shows in year fifteen.

Listen to the full conversation with Jason Voglis on The Good Builder Podcast.

Frequently asked questions

What is the difference between UniCote Coastal and UniCote Extreme?

UniCote Coastal is prepainted steel with a zinc, aluminium and magnesium coating designed for salt affected environments. UniCote Extreme is made from marine grade aluminium, which does not suffer red rust, and is intended for the most exposed sites. UniCote says it assesses projects individually and confirms warranties in writing.

How far from the coast does salt corrosion affect roofing?

There is no single safe distance. Prevailing winds can carry salt well inland, so a site a kilometre or more from the water can still need a more corrosion resistant product. UniCote publishes a suitable distance from marine influence for each of its product tiers.

Is imported prepainted steel lower quality than local product?

Not by default. Jason Voglis says quality depends on the mill, the specification it works to and independent testing. Inferior imported product exists, but material from reputable, accredited mills built to a defined specification can perform to a high standard.

What does premium mean for a roofing or cladding product?

In Voglis’ view, premium has two parts: a high quality product, and the service around it, including reliable supply, technical advice and support on site when problems come up.


Related articles

Last updated: 26 October 2026

General information only. This article is general information only and does not take into account your particular circumstances. Product suitability, warranty terms and corrosion classification depend on individual project conditions. Confirm specifications and warranty coverage with the manufacturer, and seek independent professional guidance before making decisions based on this content.


TGB Editorial
Author: TGB Editorial

0 Comments

TGB Editorial

TGB Editorial

Related News

How AI Renders Help a Brisbane Renovation Builder Win More Quotes

How AI Renders Help a Brisbane Renovation Builder Win More Quotes

Baihn Construction does bathrooms, kitchens and extensions across Brisbane and the Gold Coast. Its team told Az that one simple AI tool has changed how its quotes land, and that plain communication does the rest. Most renovation clients cannot read a floor plan. They...

TRENDING

The Good Builder Fishing Classic: Barra, Bragging Rights and a Bird

The Good Builder Fishing Classic: Barra, Bragging Rights and a Bird

No lanyards. No name tags. No function room. On Friday 30 October, builders, trades and suppliers swapped the office for the water at Bli Bli Barra Park, and the first Good Builder Fishing Classic delivered big barra, a few new nail gun owners and one very unexpected...

BROWSE FURTHER