Off form concrete is a commercial method that rarely turns up in regional homes. Cresco Australia engineered one in Wagga Wagga, and the hardest part was not the look.
Lancaster Homes designed and built Nero, a home in the Wagga Wagga suburb of Estella, using off form concrete: walls cast in place and left exposed as the finished surface.
Cresco Australia, the Wagga based engineering firm behind the structural design, says Nero is believed to be the first off form concrete house in the city. The method is far more familiar on commercial buildings than on suburban blocks.
According to Cresco, the choice was mainly about aesthetics: smooth, uninterrupted surfaces that give the home a commercial look well removed from the typical regional house.
That gap is the story. Making a commercial method work in a home meant solving load paths, formwork, reinforcement and retaining at the same time, with every decision visible in the finished walls.
Off form concrete leaves nothing to hide behind
On a standard build, the structure sits behind something. Brick, cladding, plasterboard and render all cover the imperfections of the frame or the slab edge.
Off form work removes that layer. The face of the formwork becomes the face of the wall, so panel joints, tie holes and any variation in the pour become part of the finished home.
Cresco lists formwork precision as one of the core challenges on Nero, tied to two outcomes at once: the finish the design called for and the durability of the structure. On an off form job, the formwork is the finish.

What is off form concrete?
Off form concrete is concrete cast in place against formwork and left exposed as the finished surface, with no render, paint or cladding over it. The texture and marks of the formwork stay visible, so the quality of the formwork directly shapes the final finish.
That changes the relationship between engineer and builder. Decisions that normally sit with the trades on site, such as where joints fall, carry architectural consequences and need settling much earlier.
The walls carry the house as well as define it
On Nero, the concrete is not a feature skin. Cresco describes the in situ concrete as the load bearing structure, which put the walls at the centre of the engineering brief.
The firm identifies reinforcement as a specific challenge: keeping the strength the structure needed while leaving the design room to move. In concrete that will be seen, that balance matters more than usual.
More steel can solve a strength problem on paper. In practice, congested sections are harder to place and compact concrete around, and in exposed work the results of poor compaction show up on the surface.
On an off form job, the formwork is the finish.
The retaining walls became part of the architecture
The detail that sets Nero apart is what happened to the retaining. On most sloping sites, retaining walls are their own element, designed, built and often finished separately from the house.
On Nero, Cresco integrated the retaining wall footings into the slab and merged the retaining wall design with the off form walls, holding the clean lines the design called for.
In practical terms, the wall holding back the ground is also a finished wall of the home. The footing, the slab and the wall above had to be engineered as one system rather than three separate packages handed to different trades.
It is also where a commercial engineering background shows up on a residential job.

Cresco analysed the whole building as one structure
Cresco’s answer was a comprehensive, integrated analysis of the entire building, so the structural and architectural elements were designed to work together from the start rather than reconciled later.
The firm presents the project under the line “Where Commercial Strength Meets Residential Elegance”, and the description fits its workload. Cresco’s project list runs from a train loader at Bellata and ventilation fans for an underground gold mine to grain storage, a hotel and several homes around Wagga Wagga.
Its commercial work leans on the same approach. In a profile of the firm by software developer IDEA StatiCa, Cresco reported cutting steel plate thickness by roughly 20 per cent on the Busabout bus depot in Wagga Wagga, using a model based design workflow to test connection details that conservative assumptions would have oversized.
Director Shane Lutze has previously told us he sees too much conservatism in the industry. Nero shows the same thinking applied to a home: a structure designed precisely enough that the engineering serves the architecture rather than fighting it.
Builder and engineer worked the problem together
Cresco credits the outcome to its collaboration with Lancaster Homes, which acted as client, building designer and builder on the project. The people drawing the home and the people building it were the same team, working directly with the engineer.
The firm says the final structure met regulatory standards and achieved both its aesthetic and structural goals, and it presents Nero as a benchmark for future off form residential work in the area.
Cresco is a multidisciplinary practice headquartered in Wagga Wagga, covering structural, mechanical and civil engineering, architecture, project management, surveying and fabrication drawings. It lists ISO 9001, ISO 45001 and ISO 14001 certification and Chartered Professional Engineer credentials.

What Nero means for regional builders
Off form concrete is unlikely to replace brick veneer in the Riverina any time soon. It takes more planning, it is less forgiving on site, and it leaves no finishing trade to cover a mistake.
Nero shows what the method demands when it does turn up in a home: an engineer who has worked with in situ concrete at commercial scale, structural input before the design is locked, and a builder prepared to treat formwork as finished work.
For regional clients chasing architectural homes, it also shows that capability no longer has to be trucked in from a capital city.
Cresco is also working to keep that capability local. Its Work Integrated Learning Scholarship with the University of Wollongong supports engineering students from the Riverina, combining financial support with a final year intern position, and is open only to applicants from rural or regional areas.
THE GOOD BUILDER TAKE
The striking part of Nero is the concrete. The instructive part is the retaining.
Folding retaining walls, footings and the slab into one engineered system is where an off form home succeeds or fails, and it only works when the engineer is in the room before the design is set. For regional builders weighing up architectural work, the bigger lesson is less about concrete and more about when the engineer gets the call.
Cresco Australia is part of our Directory community. Find Cresco Australia in our Directory to connect with their team.
Frequently asked questions
Off form concrete is concrete cast in place against formwork and left exposed as the finished surface, with no render, paint or cladding over it. Because the formwork marks stay visible, formwork accuracy directly shapes the final finish.
Cresco Australia, a Wagga Wagga based engineering firm, provided the structural engineering for Nero. Lancaster Homes was the client, building designer and builder.
Yes. On Nero, Cresco integrated the retaining wall footings into the slab and merged the retaining wall design with the off form walls, so the walls retaining the site also form finished walls of the home.
The concrete is the finished surface, so there is no later trade to cover defects. Formwork accuracy, reinforcement layout and concrete placement all affect how the wall looks as well as how it performs.
Related articles
- The Engineering Partner Builders Call ‘Part of the Team’
- Measure Twice, Build Once: Cresco’s Edge in Residential Engineering
- The Building Better Guide
Last updated: 17 November 2026
General information only. This article is general information and does not constitute engineering, legal or financial advice. It does not take into account your circumstances. Seek independent professional advice before acting on any information in this article.









0 Comments